Guides
Practical, step-by-step guides for getting the most out of your Bambu Lab printer.
Getting started
New to Bambu Lab printers? Start here.
First time setup
From unboxing to first print. Physical setup, Wi-Fi, calibration, and your first test print.
Bambu Studio basics
Import models, configure settings, slice, and send prints. The essential slicer workflow.
Which printer should you buy?
Honest recommendations by use case and budget. No sponsored picks, no hedging.
Your first week
Day-by-day plan from unboxing to confident printing. Structured progress, no overwhelm.
Firmware updates
What changed in recent updates, how to update safely, and the Authorization Control situation.
Maintenance
Keep your printer running reliably.
Routine maintenance checklist
Weekly, monthly, and quarterly tasks. 10-15 minutes prevents most unplanned failures.
Hotend and nozzle replacement
Model-specific guides: tool-free on A1 and A1 Mini, two screws on X1C, P1S and P1P. When to replace and which type.
Belt tension and adjustment
How the printer's frequency sweep flags a loose belt, and Bambu's step-by-step retensioning.
Build plate care and cleaning
Textured PEI, Smooth PEI, Engineering Plate, Cool Plate SuperTack and the discontinued Cool Plate: daily cleaning, deep clean, and when to replace.
Carbon rod care
IPA wipe, never oil or grease. What to use, how often, and when bearings need attention. For X1C, P1S, P1P.
Extruder deep clean
Cold pulls, gear cleaning, PTFE tube inspection. When to do it and when a nozzle replacement is enough.
Materials and techniques
Engineering materials guide
PC, Nylon, CF composites, ASA, PPA. Printer compatibility, settings, and handling requirements.
Multi-color printing
AMS setup, Bambu Studio color tools, purge reduction, and practical tips for clean transitions.
Third-party filament
What works, what to look for in quality, and how to set up profiles for non-Bambu spools.
Supports in Bambu Studio
Tree or normal, the top Z gap, support filament and PETG under PLA, plus fixes for supports that weld on or topple.
Production printing
Print farm strategies, workflow optimization, printer selection, and failure reduction at scale.
Troubleshooting
Fix specific problems.
First layer not sticking
Most adhesion issues are solved by cleaning the plate. The rest need Z-offset or temperature fixes.
Stringing and oozing
Temperature, retraction, and travel speed. Three levers that eliminate most stringing.
Layer shifting
Belts, collisions, speed, friction, electrical. Systematic diagnosis for prints that move sideways.
AMS detection issues
Hall sensors, RFID, feeder gears, filament buffer. Fix filament detection errors step by step.
Nozzle too close to bed
Transparent lines, scraping, motor skipping. Calibrate Z-offset step by step.
Interactive troubleshooter
Select your problem, get step-by-step solutions. Covers adhesion, stringing, warping, clogs, and more.
MakerWorld
Get more out of Bambu's model platform.