Bambu Lab Lasers and Scanners: the R1, the H2 Laser Modules and the S1
Which Bambu Lab devices are not 3D printers?
Bambu sells one standalone laser, the R1, a 55 W CO2 laser cutter at $2,499 in its US store, and blue diode laser modules for its H2 printers: 10 W for the H2S, 10 W or 40 W for the H2D and H2C. Its 3D scanner, the S1, is announced for November 2026 with no price or specs yet.
This section collects them in one place. Each device links to our full coverage; prices are Bambu's US store prices.
- standalone laser in Bambu's lineup, the R1
- 1
- laser module options for the H2 printers
- 3
- 3D scanner announced, the S1
- 1
At a glance
- R1, CO2 laser cutter
- $2,499, 55 W
- Laser module, H2S
- 10 W, $638
- Laser module, H2D and H2C
- 10 W, $698; 40 W, $1,348
- S1, 3D scanner
- announced for November 2026, no price yet
R1: the CO2 laser cutter
The R1 is a 55 W CO2 laser in a closed case with a 600 × 300 mm work area, 1,000 mm/s and 33.5 kg. It cuts and engraves wood, acrylic including clear acrylic, leather, fabric and paper, and engraves coated metal, glass and ceramic; bare metal it cannot engrave. Specs, accessory costs, safety and our verdict are in our full R1 coverage.
| Configuration | US store price |
|---|---|
| R1 | $2,499 |
| R1 Long Material Bundle | $3,289 |
| R1 Long Material & Rotary Bundle | $3,499 |
Checked November 17, 2026. Bundle prices are the store price; Bambu also shows a higher "Total Value" for buying the parts separately. Newest R1 firmware: 01.01.00.00.
Laser modules for the H2 printers
If you already own an H2S, H2D or H2C, Bambu's Laser Upgrade Kit adds a blue diode laser module to the printer. Which power fits which printer follows Bambu's kit options:
| Kit | Fits | US store price |
|---|---|---|
| Laser Upgrade Kit, 10 W | H2S | $638 |
| Laser Upgrade Kit, 10 W | H2D, H2C | $698 |
| Laser Upgrade Kit, 40 W | H2D, H2C | $1,348 |
Checked November 17, 2026, with the laser module included. The H2S takes only the 10 W module. How a diode module compares with the R1's CO2 tube for cutting and engraving: CO2 vs diode laser.
S1: Bambu's 3D scanner
Bambu announced the S1 on October 12, 2026 as a 3D scanner coming in November. Its product page still reads "November 2026, Coming soon" and shows no price, accuracy figure or scanning method. The FCC file describes a battery-powered device, tested for use in the hand, with only its 5 GHz Wi-Fi switched on. What is confirmed and what is still open is tracked on upcoming Bambu devices; this section gets the S1's specs and price when Bambu publishes them.
Our take
If you own an H2 printer and want to try laser work, start with the module that fits it. If you want to cut sheets regularly while your printer keeps printing, the R1 is the dedicated machine. For the S1, wait for Bambu's specs before planning around it.
Sources
6 sources, including Bambu Lab store, Bambu Lab product pages and Bambu Lab forum.
ShowHide
- R1 specs: Bambu Lab R1 page, detailed in our R1 coverage
- R1 and bundle prices: Bambu Lab US store, R1
- Laser kit options and prices: Bambu Lab US store, Laser Upgrade Kit
- R1 firmware: Bambu wiki, R1 firmware release history
- S1 announcement: Bambu forum, October 12, 2026; status: Bambu Lab S1 page
- S1 FCC file: FCC ID 2A6J8-DS001 via fccid.io; battery and use at the hands: SAR test report; only 5 GHz Wi-Fi active: declaration letter
Prices change often, check the store before buying. The store links are direct links without a commission.
- Page
- Last updated
- Status
- Not affiliated with Bambu Lab