All Printers
Full spec table. Click any printer name to see its detail page.
| Spec | A1 Mini | A1 | A2L New | P1S | X1C Disc. | X1E Disc. | X2D | P2S | H2S | H2D | H2C | H2D Pro | P1P Disc. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Price | $209 | $299 | $469 | $369 | $1,199 | $2,499 | $649 | $549 | $1,199 | $1,549 | $2,199 | $3,799 | Disc. |
| Build volume (mm) | 180×180×180 | 256×256×256 | 330×320×325 | 256×256×256 | 256×256×256 | 256×256×256 | 256×256×260 | 256×256×256 | 340×320×340 | 325×320×325 | 305×320×325 (right nozzle) | 325×320×325 | 256×256×256 |
| Build volume (in) | 7.1×7.1×7.1 | 10.1×10.1×10.1 | 13×12.6×12.8 | 10.1×10.1×10.1 | 10.1×10.1×10.1 | 10.1×10.1×10.1 | 10.1×10.1×10.2 | 10.1×10.1×10.1 | 13.4×12.6×13.4 | 12.8×12.6×12.8 | 12×12.6×12.8 (right nozzle) | 12.8×12.6×12.8 | 10.1×10.1×10.1 |
| Max speed | 500 | 500 | 500 | 500 | 500 | 500 | 1000 | 600 | 1000 | 1000 | 1000 | 1000 | 500 |
| Accel. | 10k | 10k | 10k | 20k | 20k | 20k | 20k | 20k | 20k | 20k | 20k | 20k | 20k |
| Nozzle max | 300°C | 300°C | 300°C | 300°C | 300°C | 320°C | 300°C | 300°C | 350°C | 350°C | 350°C | 350°C | 300°C |
| Bed max | 80°C | 100°C | 80°C | 100°C | 110°C (120°C at 110 V) | 110°C (120°C at 110 V) | 120°C | 110°C | 120°C | 120°C | 120°C | 120°C | 100°C |
| Enclosure | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | No |
| Chamber | None | None | None | Passive | Passive | Active (60°C) | Active (65°C) | Passive (~50°C) | Active (65°C) | Active (65°C) | Active (65°C) | Active (65°C) | None |
| Dual nozzle | – | – | – | – | – | – | Yes (Aux) | – | – | Yes | Vortek | Yes | – |
| AMS | Lite, or up to 4 AMS | Lite, or up to 4 AMS | Lite + 4 AMS (19×) | 4 AMS (16×) | 4 AMS (16×) | 4 AMS (16×) | 2 Pro / HT (25×) | 8 AMS (20 slots) | 2 Pro / HT (24×) | 2 Pro / HT (25×) | 2 Pro / HT (25×) | 2 Pro / HT | 4 AMS (16×) |
| HEPA filter (stock) | – | – | – | – | – | Yes | Yes | – | Yes | Yes | Yes | Yes | – |
| Lidar | No | No | No | No | Yes | Yes | No | No | No | No | No | No | No |
| AI detection | Cam | Cam | Cam | Cam | AI + Lidar | AI + Lidar | AI (2× Cam) | AI | AI | AI | AI | AI | Cam |
| Laser | – | – | Cut opt. | – | – | – | – | – | Opt. | Opt. | Opt. | Not specified | – |
| Weight | 5.5 kg | 8.3 kg | 12.8 kg | 12.95 kg | 14.13 kg | 16 kg | 16.25 kg | 14.9 kg | 30 kg | 31 kg | 32.5 kg | 31 kg | 9.65 kg |
Prices: Bambu US store, checked October 6, 2026. Struck-through = Bambu's "Typical Price", the median store price on at least 7 of the last 90 days, excluding promotions (shown on four models: the A1 Mini, P1S, H2S and H2D). Discontinued X1C and X1E and the H2D Pro (sold through resellers only): launch price. Full price tracker →
A1 Mini, A1 and the new A2L. Open frame, no enclosure, AMS Lite. For PLA/PETG hobbyists. The A2L adds the largest A-series build volume (330 × 320 × 325 mm) and an optional cutting-plotter kit. $209-469 at current store prices.
P1S, P2S, X1 Carbon, X2D. Enclosed. The X2D and X1E filter particles (3-stage with H12 HEPA), as does the whole H2 series; P1S, X1C and P2S carry an activated carbon filter without a HEPA stage, built for odour and VOCs (Bambu still lists particulate filtration as supported on the P2S). ABS/ASA capable. X1C adds Lidar; the newer X2D replaces it with dual nozzle + active 65°C chamber at a lower price. The X1C and enterprise X1E were both discontinued in March 2026. From $369 (P1S) to $899 (X2D AMS Combo).
H2S, H2D, H2C, H2D Pro. Active 65°C chamber, 350°C nozzle, 1,000 mm/s. Engineering materials. H2C adds the Vortek hotend-swap system with minimal purge. H2D Pro is the enterprise variant. $1,199 (H2S) to $3,799 (H2D Pro, launch price).
Prices: Bambu US store, checked October 6, 2026 (see the note under the table). Bambu also runs dated sales several times a year; the price tracker logs each one.
Speeds: Rated max speeds are theoretical. Real-world quality printing runs at 60-80% of max. The H series at 1,000 mm/s is genuinely fast, but geometry and material limit actual throughput.