Bambu Studio and OrcaSlicer Version Tracker
The current stable and beta release of both slicers, the Bambu printers each one has a profile for, and the firmware that needs a newer Bambu Studio
What is the latest Bambu Studio version?
The current stable Bambu Studio is 2.9.1 (build 02.09.01.70), released . No public beta on GitHub is newer. The current OrcaSlicer is 2.5.1, released , with no newer pre-release. Bambu Studio 2.9.1 brings printer profiles for 15 Bambu printers, OrcaSlicer 2.5.1 for 14, without the H3C.
- Bambu printers with a profile in Bambu Studio 2.9.1
- 15
- Bambu printers with a profile in OrcaSlicer 2.5.1
- 14
- Bambu Studio releases on GitHub in 2026, stable and beta
- 17
Versions at a glance
- Bambu Studio, stable
- 2.9.1,
- Bambu Studio, beta
- none newer than 2.9.1
- OrcaSlicer, stable
- 2.5.1,
- OrcaSlicer, pre-release
- none newer than 2.5.1
Bambu Studio releases on GitHubOrcaSlicer releases on GitHub
Current versions
GitHub marks Bambu Studio betas and OrcaSlicer alphas, betas and release candidates as pre-releases; every other release counts as stable here. A beta only shows as current when it is newer than the stable release. Versions are read from GitHub, data as of November 17, 2026.
| Slicer | Version | Released | What's new | Firmware | Notes |
|---|---|---|---|---|---|
| Bambu Studiostable | 2.9.1build 02.09.01.70 | Adds the H3C and mixed nozzle diameters: one model can use nozzles of different sizes, each at its own layer height (H3C only for now). | None named. The reworked AMS filament backup works only on the H3C until other printers get a firmware update. | GitHubOur article | |
| Bambu Studiobeta | None newer than 2.9.1 | Last beta: 2.8.4, | 2.9.1 includes the features of the 2.8.3 and 2.8.4 public betas. | – | Last beta |
| OrcaSlicerstable | 2.5.1 | Maintenance release: Bambu printers added over LAN in 2.4 or earlier reappear in the Device tab, the HTTPS CA file now applies to Bambu LAN printers, two security fixes. | None named. | GitHubOur article | |
| OrcaSlicerpre-release | None newer than 2.5.1 | Last pre-release: 2.5.0 RC, | No pre-release on GitHub is newer than the stable version. | – | Last pre-release |
- Released: the day the release was published on GitHub (UTC).
- Firmware: what the release notes say about printer firmware. “None named” means the notes name no minimum firmware.
Which Bambu printers each slicer supports
Each slicer ships ready-made printer profiles; without one you set up the printer yourself. The table lists the Bambu printer profiles in the current stable release of each slicer, read from the profile folder in its source code on GitHub.
| Printer | Bambu Studio 2.9.1 | OrcaSlicer 2.5.1 |
|---|---|---|
| A1 mini | Yes | Yes |
| A1 | Yes | Yes |
| A2L | Yes | Yes |
| P1S | Yes | Yes |
| P2S | Yes | Yes |
| X2D | Yes | Yes |
| H2S | Yes | Yes |
| H2D | Yes | Yes |
| H2D Pro | Yes | Yes |
| H2C | Yes | Yes |
| H3C | Yes | No profile |
| X1 Carbon | Yes | Yes |
| X1 | Yes | Yes |
| X1E | Yes | Yes |
| P1P | Yes | Yes |
- Yes: the release ships a printer profile “Bambu Lab <model>” in its profile folder (Bambu Studio v02.09.01.70, OrcaSlicer v2.5.1), read November 17, 2026.
- No profile: no such file at that release; a newer pre-release or a community profile may exist.
Firmware that needs a newer Bambu Studio
Some firmware features only work from a certain Bambu Studio build on. Bambu names that build in the firmware release history; the last column is our check against Bambu Studio's releases on GitHub, so you can see which stable release has it. Current firmware for every printer is in our firmware tracker.
| Printer | Firmware | What needs it | Bambu Studio needed | First stable on GitHub that meets it |
|---|---|---|---|---|
| P2S | 01.03.00.00September 21, 2026 | E3D High-Flow Integrated Hotend support and faster travel moves | 2.8.3.66or later, per Bambu's release history | 2.9.1November 3, 2026 |
| H2C | 01.02.00.00June 1, 2026 | Filament Track Switch support (also needs Bambu Handy 3.18.0 or later) | 2.5.3.60or later, per Bambu's release history | 2.5.3April 14, 2026, before the firmware |
| P1P and P1S | 01.10.00.00March 30, 2026 | Multicolor printing from the external spool, swapping filament by hand | 2.5.2.65or later, per Bambu's release history | 2.5.3April 14, 2026 |
Our take
Stay on stable, update with a reason
Install a new stable release when your printer's firmware needs it (see the firmware table) or when it adds your printer. Betas are for trying a feature early on a second computer, not on the setup you rely on for paid or deadline prints.
Release history
The last ten releases of each slicer on GitHub, newest first, with our coverage where we wrote about a version.
Bambu Studio
- November 3, 20262.9.1 stable, build 02.09.01.70. Release notes. Our coverage: Bambu Studio 2.9.1: Mixed Nozzle Sizes, Betas Go Stable.
- September 22, 20262.8.4 beta, build 02.08.04.57. Release notes.
- September 8, 20262.8.3 beta, build 02.08.03.66. Release notes. Our coverage: Bambu Studio 2.8.3 Beta: Two Changed Defaults.
- August 21, 20262.8.2 stable, build 02.08.02.61. Release notes. Our coverage: Bambu Studio 2.8.2: Pause Points, 2.8 Goes Stable.
- August 14, 20262.8.2 stable, build 02.08.02.60. Release notes.
- July 14, 20262.8.1 beta, build 02.08.01.55. Release notes. Our coverage: Bambu Studio 2.8.1 Beta: Decompose Color Tool.
- June 25, 20262.8.0 beta, build 02.08.00.50. Release notes. Our coverage: Bambu Studio 2.8 Beta: Assembly Guides, Bridging.
- June 16, 20262.7.1 stable, build 02.07.01.62. Release notes. Our coverage: Bambu Studio 2.7: Texture-to-Color Painting.
- June 1, 20262.7.1 stable, build 02.07.01.57. Release notes.
- May 14, 20262.7.0 beta, build 02.07.00.55. Release notes.
OrcaSlicer
- November 14, 20262.5.1 stable. Release notes. Our coverage: OrcaSlicer 2.5 Released: H2C and A2L Support.
- November 7, 20262.5.0 stable. Release notes.
- November 1, 20262.5.0 RC pre-release. Release notes.
- October 27, 20262.5.0 Beta pre-release. Release notes.
- October 16, 20262.5.0 Alpha pre-release. Release notes.
- July 7, 20262.4.2 stable. Release notes.
- June 28, 20262.4.1 stable. Release notes.
- June 20, 20262.4.0 stable. Release notes.
- June 9, 20262.4.0 Beta pre-release. Release notes.
- May 25, 20262.4.0 Alpha pre-release. Release notes.
Common questions
Should I install a Bambu Studio beta?
Only on a computer where a broken project costs you nothing. Bambu's notes for the 2.8.4 beta said that 3MF files saved in the beta could not be uploaded to MakerWorld for the time being and pointed to the official release for uploads, so keep the stable version for projects you want to share.
Where do I download Bambu Studio and OrcaSlicer?
From the releases page of each project on GitHub: bambulab/BambuStudio and OrcaSlicer/OrcaSlicer. The project's old address, SoftFever/OrcaSlicer, now forwards there. Bambu's release notes also point Linux users to a Flathub version of Bambu Studio that a community member maintains.
Does OrcaSlicer support my Bambu printer?
Check the profile table above: it lists every Bambu printer profile in the current stable releases of both slicers. OrcaSlicer added the H2C and A2L in the 2.5.0 alpha of October 16, 2026, according to its release notes; the stable 2.5.0 followed on November 7.
How do I find out which Bambu Studio my firmware needs?
Bambu writes it into the firmware release history, in the form “Requires Bambu Studio … or later”. The firmware table above collects the cases we found, and our firmware tracker links the release history of every printer.
Sources
8 sources, including Bambu Studio and OrcaSlicer on GitHub and the Bambu Lab Wiki. Data as of November 17, 2026.
ShowHide
- Bambu Studio releases on GitHub, read through the GitHub API: versions, build numbers, release dates and which releases are pre-releases
- OrcaSlicer releases on GitHub, read the same way; the nightly builds are left out
- Printer profiles: the folder resources/profiles/BBL/machine at the tag of each current stable release, linked under the profile table
- Bambu Studio 2.9.1 release notes: H3C support, mixed nozzle diameters, AMS filament backup on the H3C only, the features of the 2.8.3 and 2.8.4 betas, the Flathub version (read November 17, 2026)
- Bambu Studio 2.8.4 Public Beta release notes: MakerWorld uploads of 3MF files saved in the beta (read November 17, 2026)
- OrcaSlicer 2.5.1 release notes: pull requests #17468 and #17062, the two security fixes (read November 17, 2026)
- OrcaSlicer 2.5.0 alpha release notes: “Bambu Lab H2C and A2L support” (read November 17, 2026)
- Bambu Lab Wiki firmware release histories for the P2S, H2C and P1P and P1S: the minimum Bambu Studio versions, as read by our firmware check
Versions, dates and release notes are the projects' own; the stable or beta label and the “first stable on GitHub that meets it” column are our reading of them. Not sponsored; no affiliate links on this page.
- Page
- Last updated
- Data as of
- Status
- Not affiliated with Bambu Lab