Menu
NewsReviewsPrintersCompareGuidesTroubleshootingOur Picks

Resources

MaterialsEcosystemToolsPrice TrackerFirmware TrackerAccessoriesForum

P2S vs H2C

Last updated daily price tracker

$549 enclosed all-rounder vs $2,199 multi-material system

Which one should I buy?

The P2S covers enclosed hobby printing; the H2C runs seven materials per job via Vortek at about four times the price (the H2C's AMS included). Unless multi-material production is your workflow, the P2S plus a full AMS is the better spend.

Specs: Bambu Lab P2S tech specsBambu Lab H2C tech specs, checked October 2, 2026

Where to buy

Day-one accessories
Build platesFilament dryers

Daily price history

Strengths: P2S vs H2C

P2S

  • Enclosed printing with occasional multicolor
  • Best value per capability
  • Purge waste is a nuisance, not a cost center

H2C

  • Multi-material jobs mixing rigid/flex/support
  • Production throughput and repeatability
  • Material waste is real money

Specs at a glance

FeatureP2SH2C
Price$549$2,199
Build volume256 × 256 × 256 mm305 × 320 × 325 mm (right nozzle)
Max speed600 mm/s1,000 mm/s
KinematicsCoreXYCoreXY
EnclosureYes (activated carbon only)Yes (G3 pre-filter + H12 HEPA + carbon)
ChamberPassive (~50°C)Active (65°C)
Max nozzle temp300°C350°C
AMS typeAMS, AMS 2 Pro, AMS HT (up to 20 slots)AMS 2 Pro / AMS HT (up to 25 colors)
Nozzle systemNoVortek (6 swap hotends + 1 fixed)
LidarNoNo
ReleasedOct 2025Nov 2025

US store prices, struck-through = Bambu's "Typical Price" (median store price on at least 7 of the last 90 days, excluding promotions)

The H2C is sold only as an AMS Combo, so its $2,199 includes an AMS. Like-for-like, it costs $1,450 more than the P2S Combo at $749; against the standalone P2S, the $1,650 gap includes the AMS.

Build volumes of the P2S, 256 by 256 by 256 millimeters, and the H2C, 305 by 320 by 325 millimeters, overlaid to the same scale 256 mm 305 mm 256 mm 320 mm 256 mm 325 mm front view side view P2S, 16.8 L H2C (right nozzle), 31.7 L Build volumes of the P2S, 256 by 256 by 256 millimeters, and the H2C, 305 by 320 by 325 millimeters, overlaid to the same scale 256 mm 305 mm 256 mm 325 mm front view 256 mm 320 mm 256 mm 325 mm side view P2S, 16.8 L H2C (right nozzle), 31.7 L
Fig. 1P2S 256 × 256 × 256 mm (solid) and H2C (right nozzle) 305 × 320 × 325 mm (dash-dot) to the same scale; the figures refer to different nozzle setups, so no difference is given.
Front outlines of the P2S, 392 by 478 millimeters, and the H2C, 492 by 626 millimeters, schematic, side by side to the same scale 392 mm 492 mm 478 mm 626 mm P2S H2C Front outlines of the P2S, 392 by 478 millimeters, and the H2C, 492 by 626 millimeters, schematic, side by side to the same scale 392 mm 478 mm P2S 492 mm 626 mm H2C
Fig. 2Front outlines to the same scale: P2S 392 × 478 mm, H2C 492 × 626 mm (width × height); the H2C is 100 mm wider and 148 mm taller.
  • Bambu does not label the axes of these outer dimensions (P2S 392 × 406 × 478 mm, H2C 492 × 514 × 626 mm); read as width × depth × height. Schematic outline; only the outer dimensions are Bambu's figures.
  • Source: Bambu bambulab.com/en-us/p2s/specs, retrieved 2026-10-16; Bambu bambulab.com/en-us/h2c/specs, retrieved 2026-10-16

Hobby ceiling vs production floor

The P2S handles up to 20 colors (4× AMS 2 Pro + 4× AMS HT) with purge waste, which is fine for hobby multicolor. The H2C avoids most of that purge waste structurally: six swappable hotends plus one fixed, each material keeping its own melt zone, plus H-series speed and chamber.

The gap between purge-waste-annoying and purge-waste-expensive is exactly the gap between these two buyers. Hobbyists tolerate it; production counts it.

Get the P2S if...

  • Enclosed printing with occasional multicolor
  • Best value per capability
  • Purge waste is a nuisance, not a cost center

Get the H2C if...

  • Multi-material jobs mixing rigid/flex/support
  • Production throughput and repeatability
  • Material waste is real money

Full specs and review:P2S pageH2C page

The dual-nozzle middle

The H2D at $1,549 halves the purge problem with two nozzles. The H2C is for jobs where even two dedicated melt zones are not enough.

More comparisons

What changed

Newest first, from this page's version history. Only changes to text you can read here; date refreshes and reshuffled reading links are left out.

  1. H2C price comparison now like-for-like against the P2S Combo at $749, a $1,450 gap (was the $450 Vortek premium over the H2D AMS Combo); H2C build volume marked as right nozzle.
  2. H2C AMS support listed as AMS 2 Pro / AMS HT, up to 25 colors; the text now gives the P2S up to 20 colors (was 16) and says the H2C avoids most purge waste (was eliminates it).
  3. P2S AMS support corrected to AMS, AMS 2 Pro and AMS HT, up to 20 slots (was full AMS, 16 colors).

Earlier changes

Earlier changes

  1. Added that the H2C is sold only as an AMS Combo, so its $2,199 includes an AMS (Vortek premium over the $1,749 H2D AMS Combo: $450); H2C filtration listed as G3 pre-filter, H12 HEPA and carbon.
  2. H2C price back at $2,199 after the $2,099 cut.
  3. H2C price now $2,099 (was $2,199), with $2,199 shown struck through (was $2,399).
  4. P2S filter spec corrected: activated carbon, no HEPA (was listed as HEPA plus carbon).
Comparison
P2S vs H2C
Page
Last updated
Status
Not affiliated with Bambu Lab