Menu
NewsReviewsPrintersCompareGuidesTroubleshootingOur Picks

Resources

MaterialsEcosystemToolsPrice TrackerFirmware TrackerAccessoriesForum

H2D vs H2C

Last updated daily price tracker

Two switching nozzles vs six swappable hotends

Which one should I buy?

Both solve multi-material printing, differently: the H2D ($1,549, typical price $1,749) with two switching nozzles for the common case (two materials, soluble supports); the H2C ($2,199) with Vortek for the complex case (up to seven). Most buyers need two, not seven.

Specs: Bambu Lab H2D tech specsBambu Lab H2C tech specs, checked October 2, 2026

Where to buy

Day-one accessories
Build platesFilament dryers

Daily price history

Strengths: H2D vs H2C

H2D

  • Two-material/soluble-support workflows
  • $650 less than the H2C at current US store prices
  • Bigger X-width (350 vs 330 mm in dual-combined mode)

H2C

  • Three or more materials per job
  • Dedicated hotends per material (no cross-contamination)
  • Production multi-material cell

Specs at a glance

FeatureH2DH2C
Price$1,549 $1,749$2,199
Build volume325 × 320 × 325 mm305 × 320 × 325 mm (right nozzle)
Max speed1,000 mm/s1,000 mm/s
KinematicsCoreXYCoreXY
EnclosureYes (G3 pre-filter + H12 HEPA + carbon)Yes (G3 pre-filter + H12 HEPA + carbon)
ChamberActive (65°C)Active (65°C)
Max nozzle temp350°C350°C
AMS typeAMS 2 Pro / AMS HT (up to 25 colors)AMS 2 Pro / AMS HT (up to 25 colors)
Nozzle systemYes (2 hotends, switching)Vortek (6 swap hotends + 1 fixed)
LidarNoNo
ReleasedMar 2025Nov 2025

US store prices, struck-through = Bambu's "Typical Price" (median store price on at least 7 of the last 90 days, excluding promotions)

The H2C is sold only as an AMS Combo, so its $2,199 includes an AMS. Like-for-like, the Vortek premium over the H2D AMS Combo ($1,749) is $450; against a printer without AMS, the price gap includes the AMS.

Build volumes of the H2D, 325 by 320 by 325 millimeters, and the H2C, 305 by 320 by 325 millimeters, overlaid to the same scale 305 mm 325 mm 320 mm 325 mm front view side view, identical H2D (single nozzle), 33.8 L H2C (right nozzle), 31.7 L Build volumes of the H2D, 325 by 320 by 325 millimeters, and the H2C, 305 by 320 by 325 millimeters, overlaid to the same scale 305 mm 325 mm 325 mm front view 320 mm 325 mm side view, identical H2D (single nozzle), 33.8 L H2C (right nozzle), 31.7 L
Fig. 1H2D (single nozzle) 325 × 320 × 325 mm (solid) and H2C (right nozzle) 305 × 320 × 325 mm (dash-dot) to the same scale; the figures refer to different nozzle setups, so no difference is given.
Top outlines of the H2D, 492 by 514 millimeters, and the H2C, 492 by 514 millimeters, schematic, side by side to the same scale 492 mm 492 mm 514 mm 514 mm H2D H2C Top outlines of the H2D, 492 by 514 millimeters, and the H2C, 492 by 514 millimeters, schematic, side by side to the same scale 492 mm 514 mm H2D 492 mm 514 mm H2C
Fig. 2Top outlines to the same scale: H2D 492 × 514 mm, H2C 492 × 514 mm (width × depth); both are 492 mm wide and 514 mm deep.
  • Bambu does not label the axes of these outer dimensions (H2D 492 × 514 × 626 mm, H2C 492 × 514 × 626 mm); read as width × depth × height. Schematic outline; only the outer dimensions are Bambu's figures.
  • Source: Bambu bambulab.com/en-us/h2d/tech-specs, retrieved 2026-10-16; Bambu bambulab.com/en-us/h2c/specs, retrieved 2026-10-16

Two done perfectly or seven done automatically

The H2D's dual-nozzle switching covers the workflows that drive most multi-material demand: soluble supports, two-material parts, backup spools. The H2C adds the Vortek bay to the same left/right layout: six swappable hotends plus one fixed, only a small prime per change across up to seven materials, at the cost of some X-volume and $450 more than the H2D AMS Combo ($650 over the standalone H2D, a gap that includes the H2C's AMS).

Ask what your jobs look like. Two materials per part: H2D, and keep the change. Regularly three or more, or frequent material switches mid-job: that is literally what the H2C was built for.

Get the H2D if...

  • Two-material/soluble-support workflows
  • $650 less than the H2C at current US store prices
  • Bigger X-width (350 vs 330 mm in dual-combined mode)

Get the H2C if...

  • Three or more materials per job
  • Dedicated hotends per material (no cross-contamination)
  • Production multi-material cell

Full specs and review:H2D pageH2C page

H2D below its typical price, H2C at a single price

The H2D holds at $1,549 (typical price $1,749). The H2C sells at $2,199; its reference price moved from $2,399 to $2,199 on September 16, 2026, and the Fall Sale price of $2,099 expired on September 22. Watch both on the price tracker.

More comparisons

What changed

Newest first, from this page's version history. Only changes to text you can read here; date refreshes and reshuffled reading links are left out.

  1. Spec table: the H2D has no Lidar (was yes), and its strengths now name the $650 lower price instead of Lidar and the 40W laser; Vortek changes need a small prime each (was no purge towers).
  2. Nozzle system corrected: the H2D has two switching hotends (was independent dual extrusion), and the H2C adds Vortek to the same left/right layout.
  3. Added that the H2C is sold only as an AMS Combo, so like-for-like it costs $450 more than the H2D AMS Combo ($1,749); filtration now listed as G3 pre-filter, H12 HEPA and carbon.

Earlier changes

Earlier changes

  1. Spec table: H2D build volume corrected to 325 × 320 × 325 mm (was 350 × 320 × 325 mm).
  2. H2C back at $2,199 after the $2,099 Fall Sale price expired Sep 22; the gap to the H2D is $650 again.
  3. H2C at $2,099 in Bambu's Fall Sale (Sep 16 to 22), with its list price moved from $2,399 to $2,199; the gap to the H2D ($1,549) is $550 during the sale ($650 at regular prices).
  4. H2D X-width advantage now given as 350 vs 330 mm in dual-combined mode (was 350 vs 305 mm).
Comparison
H2D vs H2C
Page
Last updated
Status
Not affiliated with Bambu Lab