P1S vs X1E
Consumer enclosed vs enterprise industrial
Which one should I buy?
Quick answer: Get the P1S ($369): it is the right pick for nearly all buyers. Get the X1E ($2,499 at its 2023 launch; Bambu US now lists $2,899 incl. AMS) only if you need enterprise PA-CF and PC production; it listed at over 6x the P1S's price, serves a completely different purpose, and is discontinued as of March 2026.
Specs: Bambu Lab P1S tech specs (PDF) · Bambu Lab X1E tech specs (PDF), checked October 2, 2026
Daily price history · Links to the Bambu Lab store and Amazon are affiliate links. We may earn a commission at no extra cost to you.
P1S
- Over 6x cheaper at $369, handles PLA, PETG, ABS and ASA for a fraction of the X1E's cost
- Full enclosure with activated carbon filter for ABS/ASA odors (no HEPA stage)
- Full AMS compatible, same multi-color ecosystem as the X1E
- Excellent fit for hobbyists, makers, and small businesses not requiring engineering materials
X1E
- Active 60°C chamber heating and a 320°C hotend for PA-CF, PC and PPS (the P1S has no chamber heater)
- Three-stage air filtration: G3 pre-filter, H12 HEPA and activated carbon, for particles and VOCs
- Hardened steel nozzle and extruder gears for fiber-filled filaments
- Enterprise networking: Ethernet, WPA2-Enterprise Wi-Fi and a LAN-only mode
Quick specs
| Feature | P1S | X1E |
|---|---|---|
| Price | $369 | $2,499 |
| Build volume | 256 × 256 × 256 mm | 256 × 256 × 256 mm |
| Kinematics | CoreXY | CoreXY |
| Enclosure | Yes | Yes |
| Chamber heating | Passive | Active (60°C) |
| Filtration | Activated carbon only | G3 pre-filter + H12 HEPA + carbon |
| Materials | PLA to ABS/ASA | PLA to PA-CF, PC, PPS |
| Ethernet | No | Yes |
The P1S handles PLA, PETG, TPU, ABS, and ASA well, covering the vast majority of consumer and small-business use cases; Bambu rates PA and PC only as capable on it and does not recommend carbon- or glass-filled filaments with its stainless steel nozzle. The X1E adds a chamber actively heated to 60°C and a 320°C hardened-steel hotend, and Bambu lists PA-CF, PC and PPS for it. The P1S enclosure has no heater.
The X1E also filters particles: a G3 pre-filter and an H12 HEPA filter sit in front of its activated carbon, where the P1S has an activated carbon filter only.
P1S is enough if...
- PLA, PETG, ABS, ASA cover your material needs
- You're not running production-volume engineering parts
- You're a hobbyist, maker, or small business
- Budget matters
X1E makes sense if...
- You need PA-CF, PC, or PPS parts
- You're running an engineering department or print farm
- Workplace VOC/particle filtration is a requirement
- You need enterprise networking (Ethernet, LAN-only mode)
Full specs and review: P1S page · X1E page