| Specification | H2S | P1S |
|---|---|---|
| Build volume (X×Y×Z) | 340 × 320 × 340 mm | 256 × 256 × 256 mm |
| Total volume | ~37 L | ~16.8 L |
| Max print height | 340 mm | 256 mm |
| Max print width | 340 mm | 256 mm |
| Price (US store, October 6, 2026) | $1,199 | $369 |
The H2S offers approximately 2.2× the print volume of the P1S. The extra 84mm of height and 84mm of width (in the X direction) may seem incremental but opens up a meaningful class of objects that simply don't fit on a P1S.
Objects that don't fit on a P1S (without splitting)
- Full-face cosplay helmets: Most helmet designs are 280–320mm tall: they fit on the H2S in one piece, require splitting on the P1S
- Motorcycle helmet-sized props: Same issue: the H2S handles them; the P1S doesn't
- Large vases and sculptures: Decorative objects in the 280–340mm range
- Full-scale prototypes: Engineering mockups that need to be true-size
- Production batches: More parts per plate = fewer plates per job = faster throughput
Objects where the difference doesn't matter
- Most functional parts (brackets, enclosures, gears), typically under 150mm
- Miniatures and figurines
- Phone cases, small gadgets
- Most household items
The honest answer: if you don't have a specific project that needs more than 256mm, the extra volume costs you $830 in price difference and doesn't benefit you. The H2S is not a general upgrade over the P1S: it's a purpose-specific choice.
Failed prints hurt more
A failed 300mm helmet on the H2S wastes significantly more filament and time than a failed 150mm print on the P1S. AI failure detection becomes more valuable as print size increases.
Print time increases non-linearly
Larger prints take much longer, even at the H2S's 1,000 mm/s maximum speed. A full-volume print can run 30–60+ hours. That's a long window for something to go wrong.
Filament cost per print
A 300mm helmet might use 600–900g of filament. At $20–25/kg for quality PLA, that's $12–22 of material per print. Failed prints at this scale are painful.
The P1S is $830 cheaper. That difference buys about 43–51 kg of Bambu PLA Basic ($18.99 per 1 kg spool, $15.99 as a refill in the Bambu US store since September 16, 2026), or another A1 for PLA-only jobs. For users who don't need the H2S's build volume, the P1S is the smarter choice: smaller and cheaper, with comparable print quality for standard-sized objects.
- Cosplay prop makers who regularly print helmets or large armor pieces
- Small production operations that benefit from more parts per plate
- Anyone with specific large-format requirements (full-scale mockups, large sculptures)
- Users who also want the H2S's 1,000 mm/s speed and 350°C high-temp nozzle capability
- You regularly print objects over 256mm
- You do cosplay props or large models
- Production batch size matters to you
- You also want 1,000 mm/s speed
- Most prints are under 200mm in any dimension
- $830 price difference is meaningful
- You don't need the extra volume